IGBT Based Indl. Battery Charger / Discharger (1 Ph)
Description
Perfect Electronics & Solar Products' Introduces state of the art Technology Full wave Thyristor / IGBT Controlled Battery Charger and Discharger, This Battery Charger can be used in Constant Current, Constant Voltage mode Charging, Charger Boost Cum Float Charging mode and Charger / Discharger Mode.
Features
1. Automatic change over from Float to Boost mode and Boost to Float mode.
2. Efficiency - Better than 80% at nominal Input and Nominal Output from 50% to 100% Load.
3. High Reliability and minimum downtime due to usage of ribbon cable connectors.
4. Soft start feature minimises the starting current surges.
5. Voltage regulation better than +/- 1% of set Charging voltage mode.
6. Ripple is less than 3% RMS of full load current.
7. High degree of immunity towards supply transients.
8. User Programmable LCD Panel to set Charging Voltage, Charging Current, Charging mode, Charging Time, Discharging Voltage, Discharging Current, Discharging mode, Charging Discharging Cycles, Low Battery.
|
PRODUCT DETAIL |
|
|
Product name |
IGBT BASED BATTARY CHARGER / DISCHARGER |
|
Rating |
Upto 30 Amp. &Upto 50 Amp. (As per Required) |
|
Charger Output Voltage |
24V - 48V DC / 60V DC – 110V DC |
|
Input Range |
230V AC +/- 15 % |
|
Frequency |
50Hz +/- 5% |
|
Controls and Indications |
Switch - Charger ON, OFF, Enter, Escap, UP, Down |
|
LCD Display |
DC Voltage, Charging Current, Input Voltage R,Y,B, Charging Time. |
|
Protections |
Automatic Electronic Trip and High Speed Pulse Inhibition under fault conditions such as, phase failure,wrong Phase sequence,Short Circuit,Charger Voltage feedback failure,Charger current limit, Charger Overload,Charger DC output over Voltage and Under Voltage |
|
Humidity |
95% RH or less (Non - Condensing) |
|
Operating Temperature |
Operation (0°C to 50°C) and Storage (-10°C to 65°C) |
|
Optional |
Protections - AC Input Over Voltage and Under Voltage Battery Reversal |
